| |
|
|
|
| Microcontroller
Type SMPS Specification Sheet |
|
| PCB Name/ Description
: ATS-MIC07 ( Built-in Micro Controller Card) |
| INPUT |
|
| Description |
Output |
| AC
Input Voltage |
230V
AC |
| AC
Input Voltage range |
80V
TO 285V AC |
| AC
Input frequency |
50Hz
to 60Hz |
| Primary current protection |
NTC & Fuse |
| OUTPUT |
|
| Description |
Single Output |
| Normal DC O/P Voltage |
|
| Minimum Load Current
|
0A
|
| Maximum Load Current
|
|
| Maximum O/P Power |
|
| Ripple & Noise |
<150
mV Peak to Peak |
| Under and Over Voltage
protection |
Micro Controller Based
(Factory Preset) |
| Total O/P Regulation
|
1% |
| Open Circuit protection |
Closed Loop Feedback
System |
| Short Circuit protection
With auto recovery. |
Yes |
MECHANICAL
|
|
| Description |
Output |
| Dimensions |
155mm X 110mm X 52mm |
| Weight |
Approx. 600 Gms. |
| I/P and O/P plug Type |
9 Pin Terminal Strip (Screw Type) |
ENVIRONMENT
|
|
| Description |
Output |
| Operating humidity |
80% RH |
| Operating temp |
Upto 70 deg.C at full load |
SAFETY
|
|
| Description |
Output |
| Between Input & Output |
1.5kV for 1 Minute |
| Between L, N & E |
1kV |
Additional
Features
|
|
Micro Controller based
Under Voltage & Over Voltage Protection Circuit.
Early Warning Signal (Active High) at 160V AC +/-5V
V (UV) and 260V AC +/-5V (OV) for Data Logging.
Micro Controller based module with Onboard Power Supply,
which can work up to 500V AC Mains Voltages. |
|
|
|
